Asphalt Additives
Innovative additive solutions for road pavement construction
Antistripping agents
The antistripping agents are complex chemical surface-active substances, that guarantee a perfect adhesion of the bitumen film on the aggregate surface.
Hot Rejuvenators
The hot rejuvenators modify the aged bitumen’s chemical and physical structure in the milled mixes and they reduce the rigidity of the new coat, produced with a milled material addition.
Cold Rejuvenators
The cold rejuvenators modify the aged bitumen’s chemical and physical structure in the milled mixes and they reduce the rigidity of the new coat, produced with milled material.
Traditional Flux Oils
The traditional flux oils modify the bitumen’s physical structure, lower the viscosity and confer to the mix a delayed workability.
Ecological Flux oils
The ecological flux oils guarantee the manufacturing of a perfectly plastic and workable cold mix either in-heap or in-bag.
Emulsifiers
Anionic, cationic and non-ionic surface-active for traditional and special bituminous emulsion production.
Traditional and special bitumen emulsions
Traditional and special emulsions for the realisation of tack-coat, impregnation, cold recycling, Slurry-seal, mono-double layer, bituminous paste, etc.
Synthetic latex
Synthetic latex modify the bitumen’s physical structure by improving the characteristics (rheological properties, penetration, springback, Fraass, etc.).
Polymers for bitumen
The polymers for bitumen modify the physical structure improving the characteristics (rheological properties, penetration, springback, Fraass, etc.).
Fibres
Fibres thicken the bitumen in the pavements type Antiskid, Porous, SMA
Cold Mix in Bags
Cold plastic mix for road maintenance produced with ecological flux oils.
Deodourising Additive
Odourless additive for bitumen which is capable of eliminating the odour of hot bitumen.
Polymers for Mix Modification
These type of polymers modify the bitumen’s physical structure by improving the characteristics (rheological properties, penetration, springback, Fraass, etc.).
Various Additives
Products such as anti-adhesives and stabilisers, fluidising additives for fuel oils and detergents for incrusted mix.
Additive for warm mixes
Iterlow is a technology-based on a liquid product that when added to bitumen decreases the production temperature by over 40°C, limits greenhouse gas emissions and reduces fuel consumption.
Anti-smog Surface Treatments
Anti-smog surface treatment composed of specific titanium dioxide for mixes. Eliminates the exhaust gases. Reduces air pollution caused by vehicles, industries and domestic heating.
Winterpave
An environmentally friendly anti-frost additive that lowers the freezing temperature of water and disturbs the formation of ice crystals. Delays the formation of slippery coating caused by snow and ice.
Stabilisers for Modified Bitumen
The stabilisers for modified bitumen are used to stabilise the bitumen mixture – polymer (modified bitumen) and increase the SBS polymerisation.
Phono-absorbant Mix
ITERSILENS is a new concept road pavement that can reduce traffic noise by five-six decibels, enough to make it more bearable.
Bulldog are here to help
The Bulldog team are on-hand to help find the right solution for your project.
Please call us on 01371 873282 or send us your enquiry.